Components

CPMF-ALL

Fastens the Horizontal Worktop Profile 8006 to the Catenarie Profile. Used with Sink & Hob Units only. 2x required per Sink & Hob Unit.

CPPF-ALL

Connects the Catenarie Profile to laminate worktops. Used to with Sink & Hob Units only. 2x required per Sink & Hob Unit.

SSS-1

Set of 4 Shelf Supports - Clear Metal Pin - 1 set per shelf

DOORBRACKET

FBHW-ALL

1 x pair is used on Base Units (Except BU06, Sink & Hob Units).

HINGERESTRICTOR

Standard Hinge Restrictor for opening - 86 Degrees (BLUM) - This is an individual item

HINGERESTRICTOR-TB83

Hinge Restrictor for Top Box Type C or E Hinge - 83 Degrees (BLUM) - This is an individual item

HINGERESTRICTOR-TB104

Hinge Restrictor for Top Box Type C or E Hinge - 104 Degrees (BLUM) - This is an individual item

HINGERESTRICTOR-TB75

Hinge Restrictor for HK27 Top Box hinge - 75 Degrees (BLUM) - This is an individual item

HINGERESTRICTOR-TB100

Hinge Restrictor for HK27 Top Box hinge - 100 Degrees (BLUM) - This is an individual item

HINGERESTRICTOR-BF83

Hinge Restrictor for Bi-Fold Hinge - 83 Degrees (BLUM) - This is an individual item

HINGERESTRICTOR-BF104

Hinge Restrictor for Bi-Fold Hinge - 104 Degrees (BLUM) - This is an individual item

CARCASELEG

CARCASELEG100

IN-M-ABGPTOP

Tip-On Piston & Adaptor (Anthracite)

PFCT-ALL

Profile Connect - Screw Fitting - Red

PDS

2500mm Plinth Dust/moisture barrier (Transparent colour)

PLINTHCLIPS

FBVE-ALL

4x Fixing Blocks required with each Vertical End Profile.

FBVM-ALL

4x Fixing Blocks required with each Vertical Mid Profile.

SPLASHTRAY6*

600mm Metal Splash Tray - Splash Tary to fit into the bottom of a 600mm sink base unit to help protect the carcase from water damage.

SPLASHTRAY8*

800mm Metal Splash Tray - Splash Tary to fit into the bottom of a 800mm sink base unit to help protect the carcase from water damage.

SOFTCLOSEHINGE

PAIR OF SOFT CLOSE HINGES WITH BASEPLATE. (BLUM)

HGHGTU

HGWHTU

HGCRTU

HGCATU

HGDGTU

HGGRTU

HGCOBTU

SPLASHTRAY9*

900mm Metal Splash Tray - Splash Tary to fit into the bottom of a 900mm sink base unit to help protect the carcase from water damage.

SPLASHTRAY10*

1000mm Metal Splash Tray - Splash Tary to fit into the bottom of a 1000mm sink base unit to help protect the carcase from water damage.

CAREKITAL

CAREKITCA

CAREKITCB

CAREKITCOB

CAREKITCR

CAREKITDA

CAREKITHEG

CAREKITHG

CAREKITMU

CAREKITSG

CAREKITWH

CAREKITDG

CAREKITRG

FFH-170

PAIR OF SOFT CLOSE 170 DEGREE HINGE AND BACKPLATE

170SOFTCLOSEHINGE

PFLJ-SLV

Mid Joint GG8006 is used to hide joints in certain applications where 2x Worktop Profiles meet.

PFLJ-BLK

Mid Joint GG8006 is used to hide joints in certain applications where 2x Worktop Profiles meet.

PFLJ-ANT

Mid Joint GG8006 is used to hide joints in certain applications where 2x Worktop Profiles meet.

PFLJ-BRS

Mid Joint GG8006 is used to hide joints in certain applications where 2x Worktop Profiles meet.

PFLJ-CPR

Mid Joint GG8006 is used to hide joints in certain applications where 2x Worktop Profiles meet.

ZERO-PRO-BLUM

PAIR OF ZERO PROTRUSION HINGES WITH BASEPLATE. (BLUM)

ECWP-SLV

End Caps CF8006 are used when the Worktop Profile 8006 comes to an end (e.g. against an end panel or next to appliances). PLANNER TO SELECT.

ECDP-SLV

End Caps CF8007 are used when the Drawer Profile 8007 comes to an end (e.g. against an end panel or next to appliances). PLANNER TO SELECT.

ECWP-BLK

End Caps CF8006 are used when the Worktop Profile 8006 comes to an end (e.g. against an end panel or next to appliances). PLANNER TO SELECT.

ECDP-BLK

End Caps CF8007 are used when the Drawer Profile 8007 comes to an end (e.g. against an end panel or next to appliances). PLANNER TO SELECT.

ECWP-ANT

End Caps CF8006 are used when the Worktop Profile 8006 comes to an end (e.g. against an end panel or next to appliances). PLANNER TO SELECT.

ECDP-ANT

End Caps CF8007 are used when the Drawer Profile 8007 comes to an end (e.g. against an end panel or next to appliances). PLANNER TO SELECT.

ECWP-BRS

End Caps CF8006 are used when the Worktop Profile 8006 comes to an end (e.g. against an end panel or next to appliances). PLANNER TO SELECT.

ECDP-BRS

End Caps CF8007 are used when the Drawer Profile 8007 comes to an end (e.g. against an end panel or next to appliances). PLANNER TO SELECT.

ECWP-CPR

End Caps CF8006 are used when the Worktop Profile 8006 comes to an end (e.g. against an end panel or next to appliances). PLANNER TO SELECT.

ECDP-CPR

End Caps CF8007 are used when the Drawer Profile 8007 comes to an end (e.g. against an end panel or next to appliances). PLANNER TO SELECT.

EXWP-SLV

External Corner Joint SG8006 is used to connect 2x Worktop Profiles 8006 running around an ECP External Corner Post.

ICWP-SLV

Internal Corner Joint AG8006 is used to connect 2x Worktop Profiles 8006 at an Internal Corner. To be used together with a 685mm H Internal Corner Post. 1x required with each Corner Base Unit or 930x930mm L Corner Base Unit.

EXWP-BLK

External Corner Joint SG8006 is used to connect 2x Worktop Profiles 8006 running around an ECP External Corner Post.

ICWP-BLK

Internal Corner Joint AG8006 is used to connect 2x Worktop Profiles 8006 at an Internal Corner. To be used together with a 685mm H Internal Corner Post. 1x required with each Corner Base Unit or 930x930mm L Corner Base Unit.

EXWP-ANT

External Corner Joint SG8006 is used to connect 2x Worktop Profiles 8006 running around an ECP External Corner Post.

ICWP-ANT

Internal Corner Joint AG8006 is used to connect 2x Worktop Profiles 8006 at an Internal Corner. To be used together with a 685mm H Internal Corner Post. 1x required with each Corner Base Unit or 930x930mm L Corner Base Unit.

EXWP-BRS

External Corner Joint SG8006 is used to connect 2x Worktop Profiles 8006 running around an ECP External Corner Post.

ICWP-BRS

Internal Corner Joint AG8006 is used to connect 2x Worktop Profiles 8006 at an Internal Corner. To be used together with a 685mm H Internal Corner Post. 1x required with each Corner Base Unit or 930x930mm L Corner Base Unit.

EXWP-CPR

External Corner Joint SG8006 is used to connect 2x Worktop Profiles 8006 running around an ECP External Corner Post.

ICWP-CPR

Internal Corner Joint AG8006 is used to connect 2x Worktop Profiles 8006 at an Internal Corner. To be used together with a 685mm H Internal Corner Post. 1x required with each Corner Base Unit or 930x930mm L Corner Base Unit.

ZBRACKETS

INTIVO

EXDP-SLV

External Corner Joint SG8007 is used to connect 2x Drawer Profiles 8007 running around an ECP External Corner Post.

ICDP-SLV

Internal Corner Joint AG8007 is used to connect 2x Drawer Profiles 8007 at an Internal Corner. To be used together with 2x 325mm H Internal Corner Posts.

EXDP-BLK

External Corner Joint SG8007 is used to connect 2x Drawer Profiles 8007 running around an ECP External Corner Post.

ICDP-BLK

Internal Corner Joint AG8007 is used to connect 2x Drawer Profiles 8007 at an Internal Corner. To be used together with 2x 325mm H Internal Corner Posts.

EXDP-ANT

External Corner Joint SG8007 is used to connect 2x Drawer Profiles 8007 running around an ECP External Corner Post.

ICDP-ANT

Internal Corner Joint AG8007 is used to connect 2x Drawer Profiles 8007 at an Internal Corner. To be used together with 2x 325mm H Internal Corner Posts.

EXDP-BRS

External Corner Joint SG8007 is used to connect 2x Drawer Profiles 8007 running around an ECP External Corner Post.

ICDP-BRS

Internal Corner Joint AG8007 is used to connect 2x Drawer Profiles 8007 at an Internal Corner. To be used together with 2x 325mm H Internal Corner Posts.

EXDP-CPR

External Corner Joint SG8007 is used to connect 2x Drawer Profiles 8007 running around an ECP External Corner Post.

ICDP-CPR

Internal Corner Joint AG8007 is used to connect 2x Drawer Profiles 8007 at an Internal Corner. To be used together with 2x 325mm H Internal Corner Posts.

PFVE-SLV

Vertical End Profile 8023 is used when a "Single Handle Opening" is required. Used with Tall or Mid Height Base Units. PLANNER TO SELECT.

PFVE-BLK

Vertical End Profile 8023 is used when a "Single Handle Opening" is required. Used with Tall or Mid Height Base Units. PLANNER TO SELECT.

PFVE-ANT

Vertical End Profile 8023 is used when a "Single Handle Opening" is required. Used with Tall or Mid Height Base Units. PLANNER TO SELECT.

PFVE-BRS

Vertical End Profile 8023 is used when a "Single Handle Opening" is required. Used with Tall or Mid Height Base Units. PLANNER TO SELECT.

PFVE-CPR

Vertical End Profile 8023 is used when a "Single Handle Opening" is required. Used with Tall or Mid Height Base Units. PLANNER TO SELECT.

PFOF-SLV

Oven Filler Profile 1275 is used to conceal the space behind the front of an appliance when used in an appliance unit. 1x required for every Microwave, Single Ovens or Warming Drawer Aperture. 2x required with every Double Oven Aperture.

PFOF-BLK

Oven Filler Profile 1275 is used to conceal the space behind the front of an appliance when used in an appliance unit. 1x required for every Microwave, Single Ovens or Warming Drawer Aperture. 2x required with every Double Oven Aperture.

PFOF-ANT

Oven Filler Profile 1275 is used to conceal the space behind the front of an appliance when used in an appliance unit. 1x required for every Microwave, Single Ovens or Warming Drawer Aperture. 2x required with every Double Oven Aperture.

PFOF-BRS

Oven Filler Profile 1275 is used to conceal the space behind the front of an appliance when used in an appliance unit. 1x required for every Microwave, Single Ovens or Warming Drawer Aperture. 2x required with every Double Oven Aperture.

PFOF-CPR

Oven Filler Profile 1275 is used to conceal the space behind the front of an appliance when used in an appliance unit. 1x required for every Microwave, Single Ovens or Warming Drawer Aperture. 2x required with every Double Oven Aperture.

PFVM-SLV

Vertical Mid Profile 8024 is used when a "Double Handle Opening" is required when two opening doors meet. Used with Tall or Mid Height Base Units. PLANNER TO SELECT.

PFVM-BLK

Vertical Mid Profile 8024 is used when a "Double Handle Opening" is required when two opening doors meet. Used with Tall or Mid Height Base Units. PLANNER TO SELECT.

PFVM-ANT

Vertical Mid Profile 8024 is used when a "Double Handle Opening" is required when two opening doors meet. Used with Tall or Mid Height Base Units. PLANNER TO SELECT.

PFVM-BRS

Vertical Mid Profile 8024 is used when a "Double Handle Opening" is required when two opening doors meet. Used with Tall or Mid Height Base Units. PLANNER TO SELECT.

PFVM-CPR

Vertical Mid Profile 8024 is used when a "Double Handle Opening" is required when two opening doors meet. Used with Tall or Mid Height Base Units. PLANNER TO SELECT.

BPSPM15

Mirrored Plinth - 3000x150mm

EF1

Easy-Fit Hinge System, Steel, White

PFHW-SLV

Horizontal Worktop Profile 8006 is positioned to the top of Base Units (Except BU06).

PFHW-BLK

Horizontal Worktop Profile 8006 is positioned to the top of Base Units (Except BU06).

PFHW-ANT

Horizontal Worktop Profile 8006 is positioned to the top of Base Units (Except BU06).

PFHW-BRS

Horizontal Worktop Profile 8006 is positioned to the top of Base Units (Except BU06).

PFHW-CPR

Horizontal Worktop Profile 8006 is positioned to the top of Base Units (Except BU06).

HKLIFT

PFHD-SLV

Horizontal Drawer Profile 8007 is positioned to the middle of 2x Drawer and 3x Drawer Base Units.

PFHD-BLK

Horizontal Drawer Profile 8007 is positioned to the middle of 2x Drawer and 3x Drawer Base Units.

PFHD-ANT

Horizontal Drawer Profile 8007 is positioned to the middle of 2x Drawer and 3x Drawer Base Units.

PFHD-BRS

Horizontal Drawer Profile 8007 is positioned to the middle of 2x Drawer and3x Drawer Base Units.

PFHD-CPR

Horizontal Drawer Profile 8007 is positioned to the middle of 2x Drawer and 3x Drawer Base Units.